Outdoor Tire Inflator with Water Supply

• Certification: ISO
• Gross Weight: 21kg/44.6lbs
• Power Requirement: 100-240VAC 50/60Hz
• Operating Temperature Range: 20ºC/-4ºF to 70ºC /158ºF
• Type: Tire Inflators
• Standard: Standard
• Model NO.: SKE-012-OD-WP-WA
• Tire Gauges Type: Tire Pressure Gauge
• Condition: New
• Transport Package: Carton
• Specification: 1260mm*360mm*360mm
• Origin: Beijing China
• HS Code: 8414809090
• Production Capacity: 30000pieces/Year

Product Description

Main features:

*174PSI/12bar/1200kPa Output pressure 

*Fit for almost any size automotive service facility

*Auto-Start Inflation

*Fully Automated, fully programmable, micro-processor controlled conversion system

*Self-diagnostic features

*Suit for: Car, Light Truck, Bus

Technical Parameters:

Dimensions   (Height*Width*Depth)	1260mm*360mm*360mm
Net   Weight	17.5kg/38.6lbs
Gross   Weight	21kg/44.6lbs
Packing   Size (Height*width*Depth)	200mm*1290mm*360mm
Power   Requirement	100-240Vac   50/60HZ
Power   Consumption	23VA
Operating   Temperature Range	-20ºC/-4ºF   to 70ºC /158ºF
Max   Inlet Air/ Nitrogen Supply	217PSI/   15bar /1500kPa
Operating   Range	5-174PSI/0.3-12bar/35-1200kPa
Accuracy	±1PSI/0.07bar   / 7kPa
Resolution	1PSI/   0.1bar /5kPa
Units   of Measurement	PSI/   bar / kPa

Specifications:

1.Auto-Start inflation

2.Automatic zero drift adjustment

3.Remain at last setting

4.Comprehensive diagnostics and error reporting

5.Audible and visual end of the cycle signal indicators

6.Large backlight LCD display

7.Vandal resistant mechanical switches

8.Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air compressor

9.1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

 

Operation Steps:

1. Set final target pressure using the +and -buttons.The LCD screen will show the target pressure.

2. Connect air hose to tire valve stem

3. Push the "FILL" button once

4. When unit "beeps" and the LCD screen flashes the target pressure, tire inflation is complete

5. Immediately remove hose

About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.


SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.


All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.


With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China

.